Is there any restriction on using road sealant?
1: Unstructured assembly
2: Cannot be used for waterproof sealing of various building curtain walls
3: Road sealant cannot be used for long-term buried underground interfaces and long-term water injection
4: Oil containing building materials are not allowed to be used
5: Transparent materials are not suitable for copper and zinc materials, and are not suitable for indoor perforated fire protection systems
6: The width of the docking joint should be at least 6 millimeters, but not exceed 5 millimeters.
7: It is not recommended to use only 5% or more of the joint seal.
8: The surface temperature of the substrate is below 4 ℃ or above 40 ℃.
9: Road sealant is insoluble in grease, plasticizers, or solvents.
10: Matte or damp surfaces do not adhere
11: Intensive ventilation section (air humidity maintenance)
12: The surface of the base material is not clean and firm
13: Rubber, tape, etc. that have not been vulcanized or partially vulcanized
14: Due to damage or peeling of the paint film, the surface of the paint film cannot be sealed.
15: Will come into direct contact with the surface of foo